Hydraulic water well drilling rig working system and matters needing attention

Since the movement system of the pocket machine is different from any operating state and operating characteristics of each device, it is divided into three parts, the rotation system, the circulation system and the circulation system. And, in this way, it is fully configured as a system.

    Rotary equipment and tools.

    Circulatory system equipment and tools.

    System equipment and tools.

    Power drive system equipment.

    Mobile system equipment.

    Control the system and check the display list.

    Auxiliary equipment.

    The following items generally mean that they are installed after installation and installed after.

    (1) Open gas, liquid and water pipes should be sealed accordingly, and the inside of the channel and joints should be kept clean to prevent foreign matter from entering.

    (2) When removing the fasteners, please clamp the clips, label them or put them in a special box.

    (3) Separately packaged spirals and spirals are packaged separately to avoid mixing high-strength spirals, other spirals and spirals.

    (4) Software degreasing of the air system, problems with water well rigs, clean the plastic wrap by tightening the outside of each pipe, scraping the screws and keeping the inside of the pipe clean.

    (5) Be careful not to damage the machine when disassembling or hanging.

    (6) When placed at a distance or stored for a long time, it is protected from rain, moisturizing, anti-fouling, ready for packaging, and ready for packaging and packaging.

    (7) All liquids (oil, water) in the equipment are used to dry the discharge.

The above is the relevant little knowledge about "Hydraulic water well drilling rig working system and matters needing attention", if you have any questions, you can contact our customer service staff of Shandong Yikuang Drilling Technology Co.,Ltd., we will be happy to discuss with you.