Precautions for parking DTH drilling rigs

The DTH drilling rig is an impact rotary drilling rig. Its internal structure is different from that of a general rock drill. Its gas distribution and piston reciprocating mechanisms are independent, that is, the impactor. The front end is directly connected to the drill bit, and the back end is connected to the drill pipe. The following down-the-hole drilling rig manufacturers will introduce to you the precautions for parking down-the-hole drilling rigs.
(1) The machine should be parked on level ground. If it is parked on a slope, the tracks of the machine should be wedged, or devices should be placed to prevent the machine from rolling away.
(2) Confirm the ground pressure of the non-working machine and confirm that the pressure bearing capacity of the ground is sufficient.
(3) Keep all components on the drilling rig in an unloaded and stable state.
(4) It is prohibited to suspend loads on parked down-the-hole drilling rigs.
The above is a summary of the parking precautions for down-the-hole drilling rigs. I hope it will be helpful to you.