Introduction
The 100-meter drilling rig is a commonly used equipment for drilling, so how to use it? Let’s take a look at it with Shandong drilling rig YK manufacturer.
1. There is an indispensable step, that is, the installation and preparation of the drilling rig.
1. Prepare the drilling cave in advance. The size of the cave can be determined according to the drilling method. Generally, the height of the cave is 2.6-2.8 meters when digging a level hole.
Details
How to use the 100-meter drilling rig
The 100-meter drilling rig is a commonly used equipment for drilling, so how to use it? Let’s take a look at it with Shandong drilling rig YK manufacturer.
1. There is an indispensable step, that is, the installation and preparation of the drilling rig.
1. Prepare the drilling cave in advance. The size of the cave can be determined according to the drilling method. Generally, the height of the cave is 2.6-2.8 meters when digging a level hole.
2. Connect water and oil pipelines, lighting fixtures, etc. to the periphery of the excavation working face for backup.
3. Build the pillars firmly according to the hole design requirements. The left and right sides of the pillar should be padded with wooden boards. After installing the horizontal axis and snap ring on the pillar according to a certain height and position, use a hand winch to lift the equipment, fix it on the pillar according to the required angle, and then adjust The drilling rig’s hole direction.
2. Next, the important second step is inspection before work.
1. When starting work, you should carefully check whether the water and oil pipelines are firmly connected and whether there is oil or water leakage.
2. Check whether the fuel pump is filled with engine oil.
3. Check whether the screws, nuts, connectors, etc. of each part have been tightened, and whether the pole is indeed firmly supported.
3. Next, comes the drilling process.
Introduction to the proper application of the 100-meter drilling rig:
When drilling, start the motor first, and then turn the push handle of the manipulator after everything is normal. Allow it to obtain appropriate driving force, and then turn the handle of the impactor to the working position. After drilling, the water inlet valve can be opened to keep the gas-liquid mixture at an appropriate ratio. To stop the operation of the motor and stop supplying water to the impactor, insert the fork into the drill pipe slot of the drill, make the motor flip the double rocker back, loosen the connector from the drill pipe, then connect the second drill pipe, and press The circulation system continues to work.
The above is a summary of how to use the 100-meter drilling rig. I hope it will be helpful to you. Follow our official website and we will regularly update tips about the drilling rig.
